●Part 1 General Aircraft Structure with Accordance to Airworthiness 1
1.1 Specifics of Civil Aircraft 1
1.1.1 The flight performances of the aircraft 1
1.1.2 Aerodynamic and strength performances 13
1.1.3 Design process and airworthiness requirements 24
1.1.4 Aircraft classification by functions 26
1.1.5 Weight calculation by statistical data 28
1.2 Classification of Aircrafts on Aerodynamic Configuration and Designing Feature 30
1.2.1 Classification by the wing arrangement in vertical and horizontal planes 30
1.2.2 Classification by the aircraft units arrangement (tail unit, engines,landing gear, etc.) 36
1.3 General Requirements to Aircraft Structure 49
1.3.1 General requirements to the aircraft 49
1.3.2 Main stages of aircraft cyclic life 53
1.4 General Knowledge About Wings 63
1.4.1 Purpose of the wing and requirements to it 63
1.4.2 Geometrical parameters and different shapes of the wing 67
1.4.3 Main structural members of the wing 71
1.4.4 Load-carry structure of the wing 77
1.5 Tail Unit of the Aircraft 82
1.5.1 Purpose of the tail unit and requirements to it 82
1.5.2 Geometrical parameters and different shapes of a tail unit 86
1.5.3 Load-carry structure of the tail unit 91
1.6 Control Surfaces and High-lift Devices (CS&HLD) of the Aircraft 95
1.6.1 Purpose of CS&HLD and requirements to it 95
1.6.2 Geometrical parameters of CS&HLD 101
1.6.3 Load-carry structure of H-LD and CS 110
1.7 Fuselage of the Aircraft 111
1.7.1 Purpose of the fuselage and requirements to it 111
1.7.2 Geometrical parameters and different shapes of the fuselage 130
1.7.3 Load-carry structure of the fuselage 134
1.8 Other Structural Members of the Aircraft 141
1.8.1 Purpose and specific requirements for the landing gear 141
1.8.2 Configuration of the landing gear 148
1.8.3 Purpose and specific requirements for the control system 172
1.8.4 Classification of the control system 178
Questions 194
Part 2 Conformity Verification and Validation of Aircraft Power Plant System 195
2.1 Definition of Concept Power Plant 195
2.1.1 General questions 195
2.1.2 Aviation power plant improvement directions 200
2.1.3 Over-all technical requirements to
aircraft power plants 204
2.1.4 Requirements to aircraft power plants in airworthiness 205
2.2 Classification of Power Plants (Types of Aircraft Engines and Their Arrangement on Aircraft 214
2.2.1 General analysis of aircraft engine types
and areas of their application 214
2.2.2 Auxiliary power unit 224
2.2.3 Engine selection 224
2.2.4 Number of Engines 225
2.2.5 Analysis of scheme of engine arrangement on aircraft 227
2.3 Engine Mounts 239
2.3.1 General information 239
2.3.2 Requirements to engine mount 241
2.3.3 Airframes of engine mounts 243
2.4 Fuel Systems of Power Plant 255
2.4.1 Purpose of fuel systems and requirements to them 255
2.4.2 Aviation fuels and their properties 270
2.4.3 Structure of fuel systems 274
2.4.4 Layouts of fuel system 274
2.4.5 Calculations of fuel systems 278
2.4.6 Venting and pressurization of fuel system 286
2.4.7 Designing the scheme and calculation of fuel dump system 291
2.4.8 Fueling system 294
2.4.9 Structural components of fuel system 296
2.5 Lubrication Systems of Power Plants 305
2.5.1 Purpose of lubrication systems and requirements 305
2.5.2 Aviation oils 310
2.5.3 General characteristics of lubrication systems 311
2.5.4 Lubrication system schemes (methods of separation air from oil) 313
2.5.5 Calculation of lubrication system 320
2.5.6 Oil cooling, coolers 322
2.5.7 Oil tank structure 324
2.6 Nacelles and Cowlings of Engines 326
2.6.1 Purpose and components of nacelles and cowlings 326
2.6.2 Airframe of nacelles for various types of engines 330
2.7 Air-Intakes 332
2.7.1 Air suction system, its purpose, requirements and components 332
2.7.2 Air intake classification 335
2.7.3 Designing model and design algorithm of subsonic air intakes 338
2.7.4 Subsonic air intake design 341
2.8 Exhaust Units of Power Plants 342
2.8.1 Exhaust units, their purpose, requirements and structure 342
2.8.2 Types of exhaust 345
2.8.3 Thrust reverse devices, their Purpose and Requirements(types of thrust reverse devices) 347
2.8.4 Aircraft noise sources. noise abatement procedures 349
2.9 Vibrations of Power Plants. Shock-Absorption of Engine Mounts 351
2.9.1 Airworthiness about powerplant vibrations 351
2.9.2 Common information about aircraft engines ribrations 352
2.9.3 Stiffness of engine mounts 355
2.9.4 Shock-absorption of engine mounts 358
2.9.5 Design of shock absorbers 359
Questions 361
References 362

《民用飛機繫統與結構適航性設計:英文》由(烏克蘭)蒂尼亞科夫·德米特裡,李龍彪,蘇艷主編